How to configure a temperature or humidity alarm

Hover over the admin tab and select organization management.
​

Select the asset alarms tab then click + new asset alarm.
​

You should now be on the configure new alarm page. Start by filling out the fields under the create new alarm in section. Select an available location from the dropdown, select an asset (or leave this field blank), and assign tags (or leave this field blank).
​

The next section you will need to complete is alarm settings. Create a unique alarm name then select the alarm type (temperature or humidity). For the threshold field, you will need to input the appropriate threshold.
​

Once the alarm is created and saved, the current reading display is updated to include options for blue and red text:

In the severity field, selecting high or highest will ensure that any incidents created from this alarm will appear on your Dashboard.
​

The next section you will see on this page is acknowledgement checklist. Click the dropdown and choose one of the available checklists.
​

Under the notification frequency field, select how often you would like a notification to send. In the alarm delay field, set the number of intervals that must be out of range before triggering the alarm.
​
For the recipient role, choose who will receive notifications for the alarm then fill out the rest of the fields next to it.
​

Under additional settings, the checkboxes are optional.
​

Finally, click the save button in the bottom right corner to create the alarm.
​
​Note: You can disable and then re-enable an alarm by selecting the toggle switch at the top of the alarm card or by disabling within organization management / asset management and then selecting the ellipsis (three dots) in the right-hand column of the asset table.